|
|
|
TECHNICAL DESCRIPTION |
|
01 |
Channel |
Dual, isolated between channels |
|
02 |
Dimensions |
107x62x27mm |
|
03 |
Weight |
Approximately 150 grams, battery included |
|
04 |
Amplitude |
Adjustable 0-60mA peak into 500 ohm load each channel,constant current |
|
05 |
Carrier Frequency |
4000Hz, Fixed (CH1) |
|
06 |
Modulating Frequency |
4-160bps, Adjustable (CH2) |
|
07 |
IF Frequency Modes |
9 modes, 1 constant mode, 5 frequency shift modes, 3 auto sweep Modes |
|
08 |
Constant Mode |
4-160bps, Adjustable |
|
09 |
Auto Sweep |
4-45 bps
80-145 bps
4-SET bps
|
|
10 |
Frequency Shift |
Five modes,
1/1 abrupt shift
6/6 abrupt shift
6/6 ramped
10/10 abrupt shift
10/10 ramped
bps adjustable |
|
11 |
Sweep Time |
15 seconds |
|
12 |
Frequency Shift
Percent |
Frequency shifts from 30% below the set frequency to 60% above and
then return to 30% below the set frequency. |
|
13 |
Output Configuration |
Quad polar (4 electrodes) |
|
14 |
Wave form |
Symmetrical Balanced Sine Wave |
|
15 |
Interference
Pulse Frequency |
4-160 bps, Adjustable, 4 bps/step |
|
16 |
Pulse Duration |
125 μs maximum |
|
17 |
Patient Compliance Meter |
Display total treatment time |
|
18 |
Lock |
Prevents the patient from accidentally changing any of the set parameters |
|
19 |
Timer |
15, 30 minute selectable |
|
20 |
LCD |
Displays mode, bps rate, abrupt/ramp, timer, and channels |
|
21 |
Max charge per
Pulse |
15 Micro-coulombs Maximum |
|
22 |
Low Battery |
A low battery indicator will show when the battery is low. |
|
23 |
Power Source |
9 Volt DC adapter, 500mA or 9 volt alkaline battery (not recommend due its short life) |
|
24 |
Tolerance |
There may be +/-10% tolerance of settings and 20% tolerance of output. |
Shopping Cart - 0 item(s) / Total: $0.00